Reset Guide: Peugeot Partner Low Tyre Pressure Light (2015-2021)
Last Updated on December 22, 2020 by Nick
Reset Guide: Peugeot Partner Low Tyre Pressure Light (2015-2021) – The Peugeot Partner is a car model from the French car manufacturer Peugeot. The third generation Peugeot Partner is a panel van. There is also a version with a double cabin.
The car version is marketed as the Peugeot Rifter. It is identical to the third-generation Citroën Berlingo, the Opel Combo E and the Toyota ProAce City. All versions are manufactured together in the PSA plant in Vigo (Spain).
Table of Contents
Reset Guide: Peugeot Partner Low Tyre Pressure Light (2015-2021)
The tyre pressure system must be initialized after an adjustment to the pressure of tyres, and after changing one or more wheels. Depending on your vehicle model year, here are a few ways to reset the tyre under-inflation detection system on Peugeot Partner:
With Tyre Set Button
Time needed: 7 minutes
Follow the instructions below if your vehicle is equipped with a Tyre Pressure Set button. Follow these steps to get started:
- Stop the vehicle and turn off the engine
Tire pressure reset process cannot be done while the vehicle is moving.
- Adjust the cold tire pressure in all four tires recommended on the tire placard
The tire placard located on the door panel
- Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the START/STOP button without touching the brake pedal
- Look for the Tyre Pressure Set button and then press it for 3 seconds
An audible signal will confirm that the sensor has been reset
With Audio Display
- Stop the vehicle and adjust the tire inflation pressure recommended on the tire placard
- Turn ON the ignition without starting the engine
- Press the MENU button at the bottom of the audio display
- Go to the CONFIGURATION menu by using the ⏪ or ⏩ button
- Press the OK button to enter the menu
- Select the Define The Vehicle Parameters
- Select the Driving Assistance
- Select the Tyre Inflation
- Select the Reinitialisation
- When a confirmation message appears, select YES to execute the TPMS reset
With Touch Screen
- Stop the vehicle and adjust the tire inflation pressure recommended on the tire placard
- Turn ON the ignition without starting the engine
- Press the MENU button
- Select the DRIVING menu by tap the screen
- Select Under-Inflation Initialisation
- Select Yes to execute the tyre pressure reset
These instructions are based on the Peugeot Partner owner’s manual. This procedure should apply to the second and third generations of the Peugeot Partner (2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Reset Guide: Peugeot Partner Low Tyre Pressure Light (2015-2021) can solve your problem. Good Luck!
About The Author
Nick
Hi! Greetings, I'm Nick, an automotive technician and a vehicle enthusiast with over a decade of experience working at a dealer service station. I have extensive knowledge of engine oils and lubricants and have helped countless customers maintain their vehicles. As an editor and author of articles on automobiles, I draw on my personal experience and professional training to provide readers with accurate and reliable information. I am passionate about sharing my expertise with others and helping them make informed decisions about their vehicles.