Reset Guide: Peugeot Expert Tyre Pressure System Light (2016-2021)

Reset Guide: Peugeot Expert Tyre Pressure System Light (2016-2021) – The Peugeot Expert is a small car that has been produced by Sevel Nord since 1995. PSA Peugeot Citroën and Fiat developed the first generation based on the Eurovan (PSA / Fiat).

In 2007 the 2nd generation appeared together with new sister models. This series was voted Van of the Year in 2008. The 3rd generation was presented in 2016 and has since been produced at the PSA plant in Valenciennes.

Table of Contents

Reset Guide: Peugeot Expert Tyre Pressure System Light (2016-2021)
With Tyre Set Button
With Audio Display
With Touchscreen Display

Reset Guide: Peugeot Expert Tyre Pressure System Light (2016-2021)

The tyre pressure system must be initialized after an adjustment to the pressure of tyres, and after changing one or more wheels. Depending on your vehicle model year, here are a few ways to reset the tyre under-inflation detection system on Peugeot Expert:

With Tyre Set Button

Time needed: 7 minutes

Follow the instructions below if your vehicle is equipped with a Tyre Pressure Set button. Follow these steps to get started:

Stop the vehicle and turn off the engine
Tire pressure reset process cannot be done while the vehicle is moving.
Adjust the cold tire pressure in all four tires recommended on the tire placard
The tire placard located on the door panel
Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the START/STOP button without touching the brake pedal
Look for the Tyre Pressure Set button and then press it for 3 seconds
An audible signal will confirm that the sensor has been reset

With Audio Display

You can also reset tyre pressure via the audio display if your vehicle is equipped with a touch screen. Follow these instructions to do it:

Stop the vehicle and adjust the tire inflation pressure recommended on the tire placard
Turn ON the ignition without starting the engine
Press the MENU button at the bottom of the audio display
Go to the CONFIGURATION menu by using the ⏪ or ⏩ button

Press the OK button to enter the menu
Select the Define The Vehicle Parameters
Select the Driving Assistance
Select the Tyre Inflation
Select the Reinitialisation
When a confirmation message appears, select YES to execute the TPMS reset

With Touchscreen Display

Make sure you have adjusted the tyre pressure recommended on the tire placard
Turn ON the ignition without starting the engine
Press the DRIVING / VEHICLE button

Select Under-inflation initialization in the Driving Functions tab menu
Select Yes to execute the tyre pressure reset

These instructions are based on the Peugeot Expert owner’s manual. This procedure should apply to the third generation of the Peugeot Expert (2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Reset Guide: Peugeot Expert Tyre Pressure System Light (2016-2021) can solve your problem. Good Luck!

Nick

Hi! Greetings, I'm Nick, an automotive technician and a vehicle enthusiast with over a decade of experience working at a dealer service station. I have extensive knowledge of engine oils and lubricants and have helped countless customers maintain their vehicles. As an editor and author of articles on automobiles, I draw on my personal experience and professional training to provide readers with accurate and reliable information. I am passionate about sharing my expertise with others and helping them make informed decisions about their vehicles.

Next 2016-2021 Peugeot Traveller Tyre Pressure Sensor Light Reset Guide »

Previous « 2014 Peugeot Bipper: How To Reset Low Tyre Pressure Sensor Light

Published by

Nick

Tags: 2016 Peugeot ExpertExpert Tyre Light ResetPeugeot Expert Tyre PressurePeugeot Expert Tyre Pressure ResetTyre Pressure System LightTyre Pressure System Reset

3 years ago