How To Reset Nikon D750 DSLR Camera To Its Factory Settings
|Last Updated on June 20, 2022 by Nick
How To Reset Nikon D750 DSLR Camera To Its Factory Settings – This camera brings a high sensor up to 24 effective megapixels. Nikon D750 entered the full-frame Nikon cameras category, which combines the two elements of cameras into one body, thus making this camera has other advantages than others. This latest Nikon camera has a strength in the high-speed continuous shooting up to 6.5 frames per second, it is stated that the continuous shooting speed is higher when compared with the Nikon D810.
LCD screens are still using the same size as the two cameras either D610 or D810 is a 3.2 inch, but the D750 uses an LCD screen that can be tilted. While the viewfinder that is used is still the same using OLED. It is also offered by the D750 in this regard including the Auto ISO control in manual exposure shooting video and still maintain exposure compensation. But unfortunately not adopt the Split Screen Display Zoom feature of the D810, so users will lose 1/8000 shutter minimum duration.
How To Reset Nikon D750 DSLR Camera To Its Factory Settings
Time needed: 7 minutes
There are several reasons you need to reset your Nikon D750 camera to factory settings, such as when you want to sell it or when a system error. In this article, we will provide information about resetting the shooting settings to their default values by simply holding two buttons.
- Turn on your camera
Make sure your camera has enough power
- Press and hold the ISO and +/- EXPOSURE COMPENSATION buttons simultaneously for three seconds
Both buttons denoted by the green dots
- If the LCD control panel blinks, the system is resetting
Done!
Warning! Do not use this function unless you are certain that you want to do this. These instructions are based on the Nikon owner’s manual. Hopefully, the article How To Reset Nikon D750 DSLR Camera To Its Factory Settings can solve your problem. Good Luck!