How To Reset Lincoln MKT TPMS Tire Pressure Monitor Light (2010-2019)
Last Updated on December 6, 2020 by Nick
How To Reset Lincoln MKT TPMS Tire Pressure Monitor Light (2010-2019) – The Lincoln MKT is a crossover from the American car manufacturer Lincoln. As a luxury-class crossover SUV, the MKT combines the properties of a station wagon (loading volume) and a van (variability) with those of a sport utility vehicle.
The car, which was produced in Oakville (Ontario) between 2009 and 2019, is positioned above the MKX and is technically based on the Ford Flex. Since the Lincoln MKT is better equipped than the Flex, it is classified as a Large Luxury Crossover in America.
How To Reset Lincoln MKT TPMS Tire Pressure Monitor Light (2010-2019)
Time needed: 7 minutes
Whenever tire pressure is adjusted, change a tire, or get it rotated you must carry out the TPMS reset procedure. You’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System on the Lincoln MKS. Follow these steps to do it:
- Park your vehicle
Stop the vehicle and turn off the engine
- Press and release the BRAKE pedal
Ensure fully pressed!
- Without starting the engine, turn the ignition key from OFF to the ON position 3 times with the ending in the ON position
If your vehicle has an ignition button, press the START/STOP button once to turn ON the ignition and then press the button again to turn OFF the ignition. Do this 3 times with the ending in the ON position
- Press and release the BRAKE pedal
Ensure fully pressed!
- Turn OFF the ignition
Do not release the key!
- Turn the ignition key from OFF to the ON position 3 times with the ending in the ON position
If your vehicle has an ignition button, press the START/STOP button once to turn ON the ignition and then press the button again to turn OFF the ignition. Do this 3 times with the ending in the ON position
- You will hear a horn if you do it right
The horn will sound twice and the TRAIN LEFT FRONT TIRE message will appear on the screen
- Start from the driver side front tire, use the TPMS Relearn tool to reset the tpms sensor
Place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
- Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
A chirp horn will confirm that the sensor has been reset
- Turn off the ignition after you reset the last tire
The TIRE LEARNING message will disappear
- Adjust the tire pressure in all four tires recommended on the tire placard
Done!
These instructions are based on the Lincoln MKT owner’s manual. This procedure should apply to the first generation of Lincoln MKT (2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 model years). Hopefully, the article How To Reset Lincoln MKT TPMS Tire Pressure Monitor Light (2010-2019) can solve your problem. Good Luck!
About The Author
Nick
Hi! Greetings, I'm Nick, an automotive technician and a vehicle enthusiast with over a decade of experience working at a dealer service station. I have extensive knowledge of engine oils and lubricants and have helped countless customers maintain their vehicles. As an editor and author of articles on automobiles, I draw on my personal experience and professional training to provide readers with accurate and reliable information. I am passionate about sharing my expertise with others and helping them make informed decisions about their vehicles.