2015-2021 Renault Scénic Tyre Pressure Warning Light Reset Guide
|Last Updated on March 25, 2021 by Nick
2015-2021 Renault Scénic Tyre Pressure Warning Light Reset Guide – The Renault Scénic was the first European car in its class: a five-seater based on a hatchback chassis. But due to the high roof, it still had the appearance of an MPV, and the easy-to-remove seats give the car a lot of space.
The Scénic had to combine the advantages of an MPV with a larger model’s manoeuvrability and safety. The second generation appeared in 2003 and the third in 2009. A modified version (Scénic III ph2) was released in 2010.
Table of Contents
2015-2021 Renault Scénic Tyre Pressure Warning Light Reset Guide
When the system detects a loss of pressure in one of the tyres, a warning light will come on to alert the driver. You should reset the Tyre Pressure Monitor System (TPMS) when this happens. Depending on your vehicle model years, here are a few ways to reset the TPMS on the Renault Scénic:
2015-2016 Models
Time needed: 7 minutes
For Renault Scénic made in 2015 2016 you can reset Tyre Pressure using the turn signal lever. Here’s how to do it:
- Stop the vehicle and turn off the engine
The Tire pressure reset process cannot be done while the vehicle is moving
- Adjust the cold tire pressure in all four tires recommended on the tire placard
The tire placard located on the door panel
- Turn the ignition key to ON position without starting the engine
If your car has a Smart key button, insert the card into reader and then press the ENGINE START button without touching the brake pedal
- Press the ▲ or ▼ button repeatedly until TYRES SET TPW or LEARNING THE TYRE PRESSURE appears on the display
The button is located on the end of the turn signal lever
- Press and hold the ▲ or ▼ button to execute the Tyre Pressure reset
Press the button for approximately 5 seconds
- Turn the ignition off and start the engine to verify the indicator has been reset.
Done!
2017-2021 Models
Unlike the previous model, in this latest model (2017 2018 2019 2020 2021), you can access the tire pressure reset via the steering button.
- Make sure to adjust the tire pressure recommended on the tire placard
- Turn ON the ignition without starting the engine
- Go to the TYRE PRESSURE menu by using the ▲ or ▼ button
- Press and hold the OK button to execute the Tyre Pressure reset
These instructions are based on the Renault Scénic owner’s manual. This procedure should apply to the second and third generations of the Renault Scénic (2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article 2015-2021 Renault Scénic Tyre Pressure Warning Light Reset Guide can solve your problem. Good Luck!