Renault Mégane: How To Reset Tyre Pressure Warning Light (2014-2021)
|Last Updated on March 25, 2021 by Nick
Renault Mégane: How To Reset Tyre Pressure Warning Light (2014-2021) – The Renault Mégane is a compact middle-class model of the French car manufacturer Renault. In 1995 this car was presented as a successor to the Renault 19.
The (Mégane) Scénic, developed based on the first generation, was the first compact MPV of its kind and was a model for competitors introduced later. The fourth generation of the Megane has been in the showroom since 2016.
Table of Contents
Renault Mégane: How To Reset Tyre Pressure Warning Light (2014-2021)
When the system detects a loss of pressure in one of the tyres, a warning light will come on to alert the driver. You should reset the Tyre Pressure Monitor System (TPMS) when this happens. Depending on your vehicle model years, here are a few ways to reset the TPMS on the Renault Mégane:
2014-2016 Models
Time needed: 7 minutes
For Renault Mégane made in 2014 2015 2016 you can reset Tyre Pressure using the turn signal lever. Here’s how to do it:
- Stop the vehicle and turn off the engine
The Tire pressure reset process cannot be done while the vehicle is moving
- Adjust the cold tire pressure in all four tires recommended on the tire placard
The tire placard located on the door panel
- Turn the ignition key to ON position without starting the engine
If your car has a Smart key button, insert the card into reader and then press the ENGINE START button without touching the brake pedal
- Press the ▲ or ▼ button repeatedly until TYRE PRESSURE menu appears on the display
The button is located on the end of the turn signal lever
- Press and hold the ▲ or ▼ button to execute the Tyre Pressure reset
Press the button for approximately 5 seconds
- Turn the ignition off and start the engine to verify the indicator has been reset.
Done!
2017-2019 Models
Unlike the previous model, in this model (2017 2018 2019), you can access the tire pressure reset via the steering button. Here’s how to do it:
- Make sure to adjust the tire pressure recommended on the tire placard
- Turn ON the ignition without starting the engine
- Go to the TYRE PRESSURE menu by using the ▲ or ▼ button
- Press and hold the OK button to execute the Tyre Pressure reset
2020-2021 Models
Just like the previous model, you can reset the tire pressure using the steering wheel buttons in this latest model (2020 2021). Here’s how to do it:
- Make sure to adjust the tire pressure recommended on the tire placard
- Turn ON the ignition without starting the engine
- Press the ❏ button repeatedly until reaching the 🚘 VEHICLE tab
- Go to the TYRE PRESSURE INITIAL menu by using the ▲ or ▼ button
- Press and hold the OK button to execute the Tyre Pressure reset
These instructions are based on the Renault Mégane owner’s manual. This procedure should apply to the third and fourth generations of the Renault Mégane (2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Renault Mégane: How To Reset Tyre Pressure Warning Light (2014-2021) can solve your problem. Good Luck!