New Mazda CX-5 Oil Change Service Minder Wrench Light Reset

New Mazda CX-5 Oil Change Service Minder Wrench Light Reset – The Mazda CX-5 is a crossover or SUV and has been in production since the end of 2012. The Mazda CX-5 replaced the Mazda Tribute, which has not been delivered in Europe for years. The Mazda CX-5 is the first Mazda model that has been fully developed with SkyActiv technologies including engines, transmissions, bodywork, and chassis.

On November 15, 2016, the new Mazda CX-5 had its world premiere at the Los Angeles Auto Show. The CX-5 2017 differs in many ways from its predecessor. Design and technology are defined in terms of driving pleasure, quality, safety, and reliability compared to its predecessor, according to Mazda. Mazda also gave the new Mazda CX-5 a new direction of its Kodo philosophy.

New Mazda CX-5 Oil Change Service Minder Wrench Light Reset

2017-2020 Mazda CX-5 Oil Change Service Minder Wrench Light Reset:

Time needed: 7 minutes.

When the remaining engine oil is low, the Wrench Indicator or Engine Oil Light will appear on the display. The engine oil data must be reset after performed change the engine oil on your vehicle. Follow the instructions below to reset the Wrench Indicator Light on your Mazda CX-5:

  1. Turn the ignition key to “ON” position without starting the engine

    If your vehicle has a Smart key button, press the START-STOP ENGINE button twice without touching the brake pedal.

  2. Tap APPLICATION menu on the touch screen

    The touch screen is located on the center dash
    Wrench Indicator Engine Oil Reset

  3. Select VEHICLE STATUS MONITOR

    Tap the touch screen to enter the menu

  4. Select MAINTENANCE 

    Tap the touch screen to enter the menu

  5. Select SCHEDULED and then select RESET

    Tap the touch screen to enter the menu

  6. When a confirmation dialog appears, select “YES”  to confirm

    Tap the touch screen to confirm

  7. Next, back to the MAINTENANCE menu and select OIL CHANGE to reset the engine oil data

    The engine oil data must be reset after performed change the engine oil on your vehicle.

  8. Select RESET and select “YES”  to confirm

    Done!

Method 2:

The engine oil system can also be reset as follows:

  • Make sure your vehicle stops and turn off the engine
  •  Press and hold the Dashboard illumination knob
  • Turn the ignition key to “ON” position without starting the engine, If your vehicle has a Smart key button, press the “Start” button twice without touching the brake pedal.
  • Continue to hold down the Dashboard illumination knob until the warning light flash for a few seconds

For more details, please watch the following video:

These instructions are based on the Mazda owner’s manual. This procedure should be work on the second generation of Mazda CX-5 (2016 2017 2018 2019 2020 model years). Hopefully, the article of New Mazda CX-5 Oil Change Service Minder Wrench Light Reset can solve your problem. Good Luck!

Name
Comment