Guide

Reset Guide: New Mercedes-Benz Sprinter Oil Service Light

The third generation of the Mercedes Sprinter was presented on February 6, 2018, in Duisburg. The first vehicles were sold in June 2018. In this post, I want to share my experience resetting the oil light or service minder on a Mercedes-Benz Sprinter.

So when maintenance service is due, the service minder light will appear on the cluster screen. The service interval must be reset after your vehicle’s oil change. So let’s see what we can do to help you.

2019-2023 Mercedes-Benz Sprinter Oil Service Light Reset Guide

Time needed: 3 minutes

Okay, guys, in this section, I’m going to show you how to reset this Service A or Service B on the Mercedes-Benz Sprinter after you change your oil. So most people don’t know how to turn it off because it’s a bit complicated, so I will show you how to turn it off now. So let’s do it!

  1. Turn on your car without starting the engine

    With the foot isn’t on the brake pedal, press the START button one time to put it in the on position

  2. Make sure the TRIP and TOTAL DISTANCE millage are displayed on the screen

    Use the Touch Control button to display the menu

  3. Press and hold the BACK button for a second

    Depending on the position of your steering wheel, this button can be located to the left-hand or to the right-hand side of the steering wheel

  4. While holding the BACK button, press and hold the TOUCH CONTROL button

    Remember! Don’t press the buttons simultaneously. The timing is very decisive at this step!

  5. After several seconds the VEHICLE DATA menu should come up

    If you do it right, that’s going to put you into the VEHICLE DATA screen

  6. Find and enter the ASSYST PLUS

    Okay, and then you are going to scroll down using the Touch Control button to where it says Assist Plus, then press the button to enter

  7. Press the START button once again

    And then that’s going to want you to press the ignition button again but still not on the break

  8. Select FULL SERVICE

    Go down to Full Service and press the button to select it

  9. Select CONFIRM SERVICE

    Highlight Confirm Service and select it

  10. Select the appropriate OIL GRADE being used

    Put in the oil that you use oil grid and then hit okay

  11. Select YES

    When a confirmation message appears, select YES to confirm it

  12. Select CONFIRM

    Done!

How To Reset Oil Light with Cluster Button

In this section, I will show you how to reset the oil lights or service lights without the control on the steering. It’s a little complicated, so what you have to do is:

  • Put the ignition to position one, so press the START button once. So make sure the ignition is not on, just the first position
  • Make sure the TRIP and TOTAL DISTANCE millage are displayed on the screen
  • Then you have to hold the right ➔ button and the BACK button on the instrument cluster
  • While holding them together and then press OK briefly
  • If you do it right, you will see the VEHICLE DATA screen
  • Press the down ⬇ button to scroll down to ASSYST PLUS
  • Press the OK button to enter the menu
  • The system will ask you to turn on the ignition, so now you have to press the START button once again
  • Then you go down to find the FULL SERVICE and select it
  • Select CONFIRM SERVICE
  • When Service carried out? appears, move to YES with the ➔ button and press OK
  • Finally, select CONFIRM to perform the service reset

For your info, this operation work for the third generation of the Mercedes Benz Sprinter (2019, 2020, 2021, 2022, and 2023 model years). For the older ones, you can reach it here.

What is Service A in Mercedes Sprinter?

That brief message on your dash will soon tell you it’s time for your first ten thousand miles. Check up what Mercedes-Benz calls “Service A,” but what you probably call is an engine oil change. So do you really need the technician? After all, how complicated is an oil change possibility?

There is quite a difference between a minor service and just an oil change though most people aren’t aware of it. A minor service requires more time and is much more involved than you think. But doing an oil change, drop the oil, and you change the filter. Maybe you might do a tire pressure, but that’s about it.

With a minor service, the dealer uses inspection sheets that go through the car top-to-bottom, in and out. They have a multi-point inspection sheet that we fill out and the Mercedes Benz service sheet, and it’s a lot they have to go through.

Your Mercedes-Benz is a fusion of luxury, performance, advanced safety, technologies, engineering excellence, and an automotive masterpiece. So this ten thousand-mile oil change is, in fact, a meticulous step-by-step inspection that is specific to both your vehicle’s model and year. It is designed to keep your Mercedes-Benz best performing like it was engineered. 

FAQ – Mercedes Sprinter Service

What does code P0101 mean in my Mercedes Sprinter?

Mass airflow sensor (MAF) power is out of whack with the Mercedes Sprinter’s P0101 code. The code is usually produced when a sensor is broken, or the connections are loose.

What kind of power steering fluid does a Mercedes take?

The CHF 11S Synthetic Oil Power Steering Fluid is an excellent choice for Mercedes Sprinters.

So that’s basically going to reset the service monitor light in your Mercedes Sprinter. If you have any questions, please leave them in the comment section, and I’ll do my best to walk you through them. All right, hopefully, I’ll hear from you quickly. Hopefully, this operation works for you. Talk to you later.

Jacob

Hi, I'm Jacob, and I have been passionate about automobiles since I was a child. I have spent countless hours assisting my father in his garage, learning everything there is to know about car maintenance and repair. For ten years, I ran a successful repair business, where I gained hands-on experience working with a variety of vehicles. As a result, I have developed a deep understanding of the mechanics of the car and have become an expert in maintaining and repairing any vehicle.

View Comments

  • my 2020 Sprinter 3500 turbo diesel has a single large color display rather than the two part black and white. Do you know how to reset the Service A on that unit?

  • Same question as the above poster. This procedure does not work for the newer color displays. Any info would be greatly appreciated! I have now spent more time on this step than the oil change itself!!

Recent Posts

Simple Steps to Reset the Oil Maintenance Light on a 2024 Lexus TX 350

Hey everyone! Today, I'll show you how to reset the Oil Maintenance Light on a…

3 months ago

Pro Tips: Resetting the Oil Change Light on Your Alfa Romeo Stelvio

Hey there, everyone! Today, I'll be showing you how to reset the oil change light…

5 months ago

Mastering the Alfa Romeo Giulia Oil Change Light Reset: Proven Techniques

What's up, everyone? If you're an Alfa Romeo Giulia owner, you know that keeping your…

5 months ago

How to Reset Oil Service Light on BMW M8 (F91 F92 F93): Quick and Easy Solutions

Hey what's up Bimmers! Owning a BMW M8 comes with the responsibility of proper maintenance,…

8 months ago

Resetting Oil Service Light on BMW 840i/M850i: Comprehensive Guide

Greetings, fellow Bimmer lovers! Today, we have an exciting topic to delve into: how to…

8 months ago

Reset Your BMW G70 Oil Service Light: A Foolproof Guide for 760i/740i Models!

What's up Bimmer! Welcome to our guide on resetting the oil service light on your…

8 months ago

This website uses cookies.