2016-2019 Mercedes-Benz SLC-Class Service Minder Reset (SLC300)

2016-2019 Mercedes-Benz SLC-Class Service Minder Reset (SLC300) – The Mercedes-Benz SLC-Class is the name given to two roadsters from the German manufacturer Mercedes-Benz. In 1972, the word “SLC” was given to the Coupé version of the SL Class (Type 107), whose production was stopped in 1981.

In 2016, to focus on the new terminology of Mercedes-Benz models, the name “SLC” was given to a two-door coupé / cabriolet based on Type 205 (Type 172). The Mercedes-Benz Type 172 is a roadster manufactured by Mercedes-Benz since 2011. It was restyled in 2016. The 172 is part of the SLK and SLC Class.

2016-2019 Mercedes-Benz SLC-Class Service Minder Reset (SLC300)

2016-2019 Mercedes-Benz SLC-Class Service Minder Reset (SLC300)

Time needed: 7 minutes.

When maintenance service is due, the Service due minder will appear on the display. The service interval must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Service Minder light on your Mercedes-Benz SLC-Class:

  1. Turn the ignition key to position 1 without starting the engine

    If your vehicle has an ignition button, press the START-STOP ENGINE button without touching the brake pedal.

  2. Make sure the VEHICLE TRIP MILAGE is displayed in the multi-function display.

    Use the navigation button to display the menu
    mercedes service minder light reset

  3. Press and hold the  (ACCEPT CALL) button for a second

    The button is located on the steering wheel

  4. While holding the  (ACCEPT CALL) button press and hold the OK button

    Remember! Don’t press the buttons simultaneously, the timing is very decisive at this step!
    mercedes benz service minder reset

  5. After several seconds the VEHICLE DATA menu should come up

    If you do it right, the VEHICLE DATA menu will appear on the screen

  6. Scroll down to ASSYST PLUS menu

    Press the OK button to enter the menu

  7. Scroll down to FULL SERVICE

    Press the OK button to enter the menu

  8. Select CONFIRM SERVICE

    You can skip this step if it’s not in your vehicle

  9. Select appropriate OIL GRADE being used

    Press the OK button to select

  10. When a confirmation message appears, select YES to confirm it

    Done!

These instructions are based on the Mercedes-Benz owner’s manual. This procedure should apply to the third generation of Mercedes Benz SLC-Class SLC300 (2016 2017 2018 2019 model years). Hopefully, the article 2016-2019 Mercedes-Benz SLC-Class Service Minder Reset (SLC300) can solve your problem. Good Luck!

Name
Comment