Howdy, pals! The newer Chevy Silverado has a cigarette lighter or 12-Volt power outlet on the dash, and from the factory this outlet is set to always powered on. This can lead to drained batteries if devices are left plugged in for an extended period. However, you can easily change the outlet power from always on to ignition controlled, ensuring that power is only supplied when the vehicle is running. This article will guide you step by step about How to Make a Power Outlet From Always ON to Ignition Controlled in the Chevy Silverado. So let’s get started.
Table of Contents
Many vehicles come with power outlets that are powered even when the car is turned off. While this can be convenient, it can also drain your car’s battery if devices are left plugged in. Changing the power outlet to be ignition controlled helps prevent this issue and ensures that power is only supplied when the vehicle’s engine is running.
Here I’ll explain how to convert a 12V outlet on a Chevy Silverado from a steady power source to one that can be controlled with accessories. Here are some guidelines to follow based on the year your car was manufactured. So let’s get into it now.
To make outlet power from always on to ignition controlled you need to find the 50-amp fuse and move it to the blank terminal in the same fuse spot. In the 2014, 2015, 2016, 2017, and 2018 Silverado, the fuse is located on the driver’s side panel inside the truck. Just pull the cover off to expose the fuses. And here’s the fuse:
If we look up the fuse diagram, the location selected fuse in 10 or 11 spot determines how the 12-volt power outlet will function. So when the 50-Amp fuse bridges the center terminal and the terminal toward the front of the truck, the 12-Volt outlet on the dash only has power with the key. But if it bridges the center terminal and the terminal toward the rear of the truck, it has always on power.
Time needed: 7 minutes
For 2019, 2020, 2021, 2022, and 2023 Silverado, the method is the same, but the location of the fuse is different. So let’s get it going!
When working with electrical components in your vehicle, it’s essential to take safety precautions. Ensure that the ignition is off before starting, and be careful not to short-circuit any wires.
The next step is to find the 50-amp fuse on the passenger’s side panel. Just pull the cover off to expose the fuse. And here’s the fuse.
After you find it, pull that 50-amp fuse out and move it to the left so it uses the terminal that wasn’t being used, then reinsert it.
Finally, turn on your vehicle’s ignition and check if the power outlet is working. If everything is connected correctly, the outlet should only have power when the ignition is on.
Switching your power outlet to be ignition controlled has several benefits, including:
If you encounter any problems after making the change, here are some common issues and their solutions:
Changing the outlet power to ignition controlled can help prevent battery drain when accessories are left plugged in. It’s a simple way to improve overall vehicle efficiency.
Yes, you can revert to the original always-on setting if needed, but ensure you follow the correct steps for reconnection.
This process is generally applicable only to 2014-2023 Silverado models, but it’s essential to check your specific wiring diagram for accurate instructions.
If not done correctly, there’s a risk of electrical issues or even a drained battery. Follow the steps carefully, and if you’re unsure, consult a professional.
Basic knowledge of vehicle wiring is helpful, but even beginners can perform this modification by following the provided instructions.
You can do this modification at any time, but it’s a good idea to do it when you’re not in a rush and can focus on the task.
So that pretty much wraps it up. Changing the outlet power from always-on to ignition controlled in your Silverado is a smart choice for improving efficiency and extending battery life. By following the steps outlined in this article and keeping safety in mind, you can make this modification with confidence. Thanks for stopping by, and see you!
Hey what's up Bimmers! Owning a BMW M8 comes with the responsibility of proper maintenance,…
Greetings, fellow Bimmer lovers! Today, we have an exciting topic to delve into: how to…
What's up Bimmer! Welcome to our guide on resetting the oil service light on your…
Wassup Bimmers? When it comes to maintaining your BMW M4 F82/F83/G82/G83, resetting the oil service…
Hey, what's up Bimmers! Welcome to the comprehensive guide on performing an easy oil service…
Hi, Bimmers! In the fast-paced world of automotive technology, staying on top of routine maintenance…
This website uses cookies.