How To Reset Nikon Coolpix B600 Superzoom Camera To Factory Settings

How To Reset Nikon Coolpix B600 Superzoom Camera To Factory Settings – Nikon D600 is claimed to be Nikon’s first full-frame camera with the smallest size. The body is made of magnesium which is resistant to dust and water. At the back of the camera, a 3.2-inch LCD is embedded to display your shots.

Full-frame CMOS sensor embedded in it can produce very sharp photos at a high-resolution level of 24.3 megapixels. Nikon EXPEED 3 processor support, making this camera not only reliable to take pictures but also in terms of video recording. Thanks to this processor chip, the D600 is capable of recording 1080p Full HD video with the support of Multi-area Full HD D-Movie mode that allows users to choose video recording in DX (crop factor) or FX (full-frame) format.

How To Reset Nikon Coolpix B600 Superzoom Camera To Factory Settings

How To Reset Nikon Coolpix B600 Superzoom Camera To Factory Settings

Time needed: 7 minutes.

There are several reasons you need to reset your Nikon Coolpix B600 camera to factory settings, such as when you want to sell it or when a system error. In this article, we will provide information about resetting the shooting settings and all setup menu settings to their default values.

  1. Turn on your camera

    Make sure your camera has enough power

  2. Press the MENU button to enter the main menu

    The button is located on the top left corner

  3. Go to the SETUP tab menu

    Use the ◄ navigation button and then highlight the menu

  4. On the SETUP tab, scroll down to find RESET ALL SETTINGS

    Press the OK button to enter the menu
    nikon factory reset default settings

  5. When a confirmation appears on the display, select YES to execute the factory reset

    Done!

These instructions are based on the Nikon owner’s manual. Hopefully, the article How To Reset Nikon Coolpix B600 Superzoom Camera To Factory Settings can solve your problem. Good Luck!