2011-2020 Toyota Land Cruiser Prado Oil Maintenance Minder Light Reset

2011-2020 Toyota Land Cruiser Prado Oil Maintenance Minder Light Reset – The Toyota Land Cruiser Prado is a four-wheel-drive mid-size car belonging to the Toyota Land Cruiser range produced by the Japanese automaker Toyota Motor Corporation. It has been produced since 1984. In Europe, it is sold under the name of Toyota Land Cruiser LC3, LC4 or LC5 (according to its generation) or under its serial number (LC 70, LC 90, LC 120 and LC 150). In North America, it is not part of the Land Cruiser lineup, but it is sold under the name of Lexus GX for the two generations of 2003 and 2009, with an almost identical body and a V8 engine.

The tenth generation of Land Cruiser, released in late 2009, remained aesthetically very close to the previous one, we can talk as a simple restyling while it has evolved a lot. In 2013, it was restyled. In 2015, it receives a new engine unprecedented 2.8 D-4D of 177 hp meeting the new standard Euro 6 antipollution to replace the 3.0 D-4D 190 hp.

2011-2020 Toyota Land Cruiser Prado Oil Maintenance Minder Light Reset

2011-2020 Toyota Land Cruiser Prado Oil Maintenance Minder Light Reset

Time needed: 7 minutes.

When engine oil needs to replace, the Oil Maintenance Required message will appear on the display. The engine oil maintenance data must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Oil Maintenance Required Light on your Toyota Land Cruiser Prado:

  1. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal

  2. Press the ODOMETER/TRIP button repeatedly until you see “TRIP A” 

    The button is located on the instrument cluster
    oil maintenance required light reset

  3. Next, turn the ignition “OFF”

    Press the ENGINE START/STOP button once

  4. Press and hold the ODOMETER/TRIP button, and turn the ignition key to the “ON” position

    If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal

  5. Continue to hold down the ODOMETER/TRIP button until “000000” MILES appears on the display and the maintenance light turns off.

    Done!

These instructions are based on the Toyota owner’s manual. This procedure should apply to the fourth generation of Toyota Land Cruiser Prado (2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2020 model years). Hopefully, the article 2011-2020 Toyota Land Cruiser Prado Oil Maintenance Minder Light Reset useful for you. Good Luck!