How To Reset Chevy Tahoe Oil Life Change Engine Oil Light (2015-2020)

How To Reset Chevy Tahoe Oil Life Change Engine Oil Light (2015-2020) – The Chevrolet Tahoe and GMC Yukon is an all-terrain vehicle of the F segment developed by General Motors and sold under the Chevrolet and GMC brands. The models have V8 configurations of 5.3 L and 355 hp for the case of the Tahoe model, and a V8 of 6.2 L and 420 hp for the luxury model Yukon. The main rival of the Chevrolet Tahoe is the Toyota Land Cruiser.

In September 2013, it was officially presented brand new Chevrolet Tahoe and GMC Yukon the next generation, as well as their long-wheelbase version. They were on sale in April 2014, therefore they are called cars of the 2015 model year. The new body has become more angular, it clearly looks two-story grille and new headlights. The slope of the windscreen was changed, it became more flat, which allowed increasing the area of its cleaning.

How To Reset Chevy Tahoe Oil Life Change Engine Oil Light (2015-2020)

How To Reset Chevy Tahoe Oil Life Change Engine Oil Light (2015-2020)

Time needed: 7 minutes.

When the remaining oil life is low, the Change Engine Oil Soon message will appear on the display. The Oil Life display must be reset after each oil change. Follow the instructions below to reset the engine oil life system on your Chevy Tahoe:

  1. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press and holds the Engine Start/Stop button for 5 seconds without touching the brake pedal

  2. Press the ◄ navigation button to access the cluster applications

    The button is located on the steering wheel
    change engine oil life light reset

  3. Find and select the INFO page

    Press the ✓ button to enter the menu

  4. Scroll down to the “REMAINING OIL LIFE” menu

    Use the ▲ or ▼ button to scroll down

  5. Press and hold the ✓ button until oil life changes to 100%

    If a message appears on the display, select YES to confirm

  6. Turn the ignition off and start the engine to verify the indicator has been reset.

    Done!

Method 2:

The oil life system can also be reset as follows:

  • Turn the ignition to ON position without starting the engine.
  • Display the REMAINING OIL LIFE on the multi-information display using the navigation button
  • Fully press the gas pedal to the floor three times within five seconds.

For more details, please watch the following video:

This tutorial we got from the Chevrolet owner’s manual. This procedure should be work on the fourth generation of Chevy Tahoe (2015 2016 2017 2018 2019 2020 model years). Hopefully, the article How To Reset Chevy Tahoe Oil Life Change Engine Oil Light (2015-2020) can solve your problem. Good Luck!