2019-2020 GMC Sierra 1500 Oil Life Light Oil Change Minder Reset (2500) – GMC Sierra is a full-size pick-up car produced under the American brand GMC since 1988. The fifth generation of the model has been produced since 2018. In March 2018, GMC introduced a completely new, fifth generation of Sierra.
The car was presented three months after the world debut of the twin Chevrolet Silverado in January 2018. The vehicle received a thoroughly modernized silhouette, with more creases and a more avant-garde shape of the headlights. They have become smaller and have gained characteristic borders made in LED technology.
Table of Contents
2019-2020 GMC Sierra 1500 Oil Life Light Oil Change Minder Reset (2500)
Time needed: 7 minutes.
When the remaining oil life is low, the Change Engine Oil Soon message will appear on the display. The Oil Life display must be reset after each oil change. Follow the instructions below to reset the engine oil life system on your GMC Sierra:
Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press and holds the Engine Start/Stop button for seven seconds without touching the brake pedal
Go to INFO tab menu by pressing the ◄ or ► navigation button on the steering wheel
Vehicle Information menu displayed by i
Scroll down and find the REMAINING OIL LIFE menu
Use the ▼ navigation button to scroll down
Press and hold the thumbwheel until the oil life display changes to 100 percent
On some models, a confirmation message will appear on the display, select YES to confirm
Turn the ignition off and start the engine to verify the indicator has been reset
Follow the instructions below if your vehicle is equipped with a Base level display and without a steering button:
Turn the ignition to the ON position without starting the engine.
Turn the Trip button until REMAINING OIL LIFE appears on the display.
Press and hold the Trip Odometer button until the “Oil Life” display changes to 100 percent.
For all models, the oil life system can also be reset as follows:
Turn the ignition to ON position without starting the engine.
Fully press and release the accelerator pedal 3 times within five seconds.
Turn the ignition off and start the engine to verify the indicator has been reset.
These instructions are based on the GMC owner’s manual. This procedure should apply to the fourth generation of the GMC Sierra (2019 2020 2021 model years). Hopefully, the article 2019-2020 GMC Sierra 1500 Oil Life Light Oil Change Minder Reset (2500) can solve your problem. Good Luck!