Easy Way To Find Lincoln Navigator Keyless Entry Keypad Factory Code

Easy Way To Find Lincoln Navigator Keyless Entry Keypad Factory Code – The Lincoln Navigator is an SUV from Ford’s premium brand Lincoln. It is based on the Ford Expedition but is equipped with higher quality. Its direct competition consists of the Cadillac Escalade and the GMC Yukon. The first generation of the Lincoln Navigator was introduced in August 1997 as a ’98 model.

A look at the fourth generation of the Navigator Lincoln showed at the New York International Auto Show 2016 with the Navigator Concept. This concept vehicle had double doors and steps that are no longer used in the production car was presented at the New York International Auto Show 2017.

Easy Way To Find Lincoln Navigator Keyless Entry Keypad Factory Code

Easy Way To Find Lincoln Navigator Keyless Entry Keypad Factory Code

Time needed: 7 minutes.

Have you lost your factory door code for your Lincoln Navigator car? Don’t worry! I’ll show you how to find the Factory preset Lincoln Navigator Securicode Keyless Entry Door Keypad Code. The first thing to get Keyless Entry Door Factory Code you must have 2 programmed keys to do this!

  1. Place the FIRST smart key fobs into the backup slot inside the center console storage compartment lid

    Note! The key buttons should be facing the rear of your vehicle and the keyring facing upward
    Keyless Entry Door Factory Code

  2. Press the START/STOP button once, and wait a few seconds

    Do not start the engine!

  3. Press the START/STOP button again to turn the ignition OFF

    .

  4. Take out that key and then place the SECOND smart key fobs

    .

  5. Press the START/STOP button once again, and wait until your factory code show up on the dash screen

    Do not start the engine!

Method 2:

If your vehicle NOT equipped with a push-button start ignition:

  • Insert the FIRST KEY in the ignition
  • Turn to the “on” position but do not start the engine, and wait about 4 seconds
  • Turn the ignition key to “OFF” position
  • Take out that key and then insert the SECOND KEY
  • Turn to the “on” position but do not start the engine, and wait until your factory code show up on the dash screen

If you do not have 2 programmed keys, you should read this:

HOW TO FIND KEYLESS ENTRY DOOR FACTORY CODE ON LINCOLN

For more details, please watch the following video:

This tutorial we got from the Lincoln owner’s manual. This procedure should work for the latest generation of the Lincoln Navigator (2017 2018 2019 2020 model years). Hopefully, the article of Easy Way To Find Lincoln Navigator Keyless Entry Keypad Factory Code useful for you. Good Luck!