Easy Way To Find Factory Keyless Entry Code on Lincoln MKZ

Last Updated on February 22, 2020 by Nick

Easy Way To Find Factory Keyless Entry Code on Lincoln MKZ – The second generation of the Lincoln MKZ was unveiled at the North American International Auto Show in January 2012 in Detroit. Originally it was supposed to be released by the end of the year, but quality issues led to a delay in delivery until 2013. The new Lincoln MKZ introduced the new Lincoln brand design at this time. Like its predecessor, the second generation is based on the Ford Fusion (second generation), known in Europe as the Ford Mondeo.

Three engine variants are offered in North America: a two-liter four-cylinder turbo engine with 240 bhp, a 3.7 liter V6 with 300 bhp or a hybrid drive based on a two-liter four-cylinder engine. The hybrid is offered only with front-wheel drive, the other two engines are available at an additional cost with four-wheel drive.

Easy Way To Find Factory Keyless Entry Code on Lincoln MKZ

Easy Way To Find Factory Keyless Entry Code on Lincoln MKZ

Time needed: 7 minutes

Have you lost your factory door code for your Ford MKZ car? Don’t worry! I’ll show you how to find the Factory preset Lincoln MKZ Securicode Keyless Entry Door Keypad Code. The first thing to get Keyless Entry Door Factory Code you must have 2 programmed keys to do this!

  1. Place the FIRST smart key fobs into the backup slot inside the center console (you need to pull up the rubber covering from the cupholder to find it)

    Note! The key buttons should be facing upwards and the unlock button facing the front of the vehicle.
    keyless entry keypad door code

  2. Press the START/STOP button once, and wait a few seconds

    Do not start the engine!

  3. Press the START/STOP button again to turn the ignition OFF

    .

  4. Take out that key and then place the SECOND smart key fobs

    .

  5. Press the START/STOP button once again, and wait until your factory code show up on the dash screen

    Do not start the engine!

Method 2:

If your vehicle NOT equipped with a push-button start ignition:

  • Insert the FIRST KEY in the ignition
  • Turn to the “on” position but do not start the engine, and wait about 4 seconds
  • Turn the ignition key to “OFF” position
  • Take out that key and then insert the SECOND KEY
  • Turn to the “on” position but do not start the engine, and wait until your factory code show up on the dash screen

If you do not have 2 programmed keys, you should read this:

HOW TO FIND KEYLESS ENTRY DOOR FACTORY CODE ON LINCOLN

For more details, please watch the following video:

This tutorial we got from the Lincoln owner’s manual. This procedure should work for the latest generation of the Lincoln MKZ (2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article of Easy Way To Find Factory Keyless Entry Code on Lincoln MKZ useful for you. Good Luck!