2008-2021 Chevrolet Equinox Tire Pressure Sensor TPMS Light Reset Guide

2008-2021 Chevrolet Equinox Tire Pressure Sensor TPMS Light Reset Guide – The Equinox is a crossover SUV manufactured by Chevrolet since 2005. The first two generations belonged to medium-sized SUVs, while the third belongs to compact-sized ones.

The second series of the Equinox was announced on December 21, 2008, and was unveiled at the public Detroit auto show in 2009. It is based on a reinforced version of the “Theta” floor used for the previous series. The new Equinox is equipped with direct injection engines.

2008-2021 Chevrolet Equinox Tire Pressure Sensor TPMS Light Reset Guide

If you replacing a spare tire with a road tire containing the TPMS sensor on your Chevy Equinox, the system will detect a malfunction and the low tire pressure warning light will blink. When that happens, the TPMS sensor reset process must be done. Depending on the vehicle model you have, here are a few ways to reset the TPMS.

2008-2010 Models

2011-2017 Models

Unlike the previous model year, you’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this 2011 2012 2013 2014 2015 2016 2017 Equinox model year. Follow these steps to do it:

• Turn the ignition key to the “ON” position without starting the engine
• Press the MENU button briefly until you see the VEHICLE INFORMATION menu on the display

• Scroll down to the “TIRE PRESSURE” menu
• Press and hold the SET/CLR button until the horn sounds twice
• Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
• Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
• Turn off the ignition after you reset the last tire
• Adjust the tire pressure in all four tires recommended on the tire placard

2018-2021 Models

Just like the previous model, you’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this latest Equinox model year. Depending on your vehicle trim level, here are how to reset TPMS on 2018 2019 2020 2021 Chevy Equinox:

Base Level Display

• Turn the ignition key to the “ON” position without starting the engine
• Go to the VEHICLE tab menu by using the ◄ ► navigation button

• Scroll down to the TIRE PRESSURE menu
• Press and hold the ✓ button until the horn sounds twice
• Start from the driver side front tire, place the Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
• Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
• Turn off the ignition after you reset the last tire
• Adjust the tire pressure in all four tires recommended on the tire placard

Uplevel Display

• Press and holds the ENGINE START/STOP button for 5 seconds without touching the brake pedal
• Press the ◄ navigation button to access the cluster applications
• Select INFO
• Scroll down to the TIRE PRESSURE menu
• Press and hold the ✓ button to enter the relearn mode
• Start from the driver side front tire, place the Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
• Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
• Turn off the ignition after you reset the last tire
• Adjust the tire pressure in all four tires recommended on the tire placard

These instructions are based on the Chevy Equinox owner’s manual. This procedure should apply to the first, second, and third generation of the Chevy Equinox (2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2019 2020 2021 model years). Hopefully, the article 2008-2021 Chevrolet Equinox Tire Pressure Sensor TPMS Light Reset Guide can solve your problem. Good Luck!