How To Reset Chevy Traverse Oil Life Change Engine Oil Light 2018-2020 – The Chevrolet Traverse is a sports utility vehicle of the full-size category of the General Motors brand Chevrolet. It has been available in North America since late 2008, replacing the TrailBlazer EXT and the Chevrolet Uplander. The model was first built in Spring Hill (Tennessee) and is since 2010 in the Delta Township at Lansing (Michigan). It is set up as a rival model to the Ford Flex. Since summer 2017, the second generation of the SUV is on the market.
The traverse of the first generation was powered by a 3.6-liter V6 with direct injection and variable camshaft adjustment, the (286 hp) provides a power output of 210 kW. A six-speed automatic transmits the power to the two front wheels, the optional four-wheel drive is available. The second generation of the Traverse debuted at the North American International Auto Show in January 2017 in Detroit and is being sold in North America since July 2017. In Russia, the vehicle first appeared in early April 2018 in the trade.
Table of Contents
How To Reset Chevy Traverse Oil Life Change Engine Oil Light 2018-2020
Time needed: 7 minutes.
When the remaining oil life is low, the Change Engine Oil Soon message will appear on the display. The Oil Life display must be reset after each oil change. Follow the instructions below to reset the engine oil life system on your Chevy Traverse:
Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press and holds the Engine Start/Stop button for 5 seconds without touching the brake pedal
Press the ◄ navigation button to access the cluster applications
The button is located on the steering wheel
Find and select the INFO page
Press the ✓ button to enter the menu
Scroll down to the “REMAINING OIL LIFE” menu
Use the ▲ or ▼ button to scroll down
Press and hold the ✓ button until oil life changes to 100%
If a message appears on the display, select YES to confirm
Turn the ignition off and start the engine to verify the indicator has been reset.
The oil life system can also be reset as follows:
Turn the ignition to ON position without starting the engine.
Display the REMAINING OIL LIFE on the multi-information display using the navigation button
Fully press the gas pedal to the floor three times within five seconds.
For more details, please watch the following video:
This tutorial we got from the Chevrolet owner’s manual. This procedure should be work on the second generation of Chevy Traverse (2018 2019 2020 model years). Hopefully, the article How To Reset Chevy Traverse Oil Life Change Engine Oil Light 2018-2020can solve your problem. Good Luck!