2012-2020 Renault Sandero Oil Change Light Service Minder Reset
|Last Updated on April 6, 2020 by Nick
2012-2020 Renault Sandero Oil Change Light Service Minder Reset – The world premiere of second-generation Sandero, based on the fourth-generation Renault Clio, took place on September 27, 2012, at the Paris Motor Show. The second generation officially appeared on the European market in January 2013, but the first cars were already delivered in November 2012.
For the first time, ESP and electro-hydraulic power steering were standard. The Sandero II is considered to be better finished, more fully equipped and has an extensive options list, with items such as MediaNAV infotainment with a color screen, Bluetooth, DAB +, a rearview camera, parking sensors, and hill start assist.
2012-2020 Renault Sandero Oil Change Light Service Minder Reset
Time needed: 7 minutes
When engine oil needs to replace, an Engine Oil light will appear on the display. The oil change interval must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Engine Oil Light on your Renault Sandero:
- Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the Engine Start/Stop button without touching the brake pedal
- Fully depress the accelerator pedal
Make sure to depress the GAS pedal
- With your foot on the accelerator, depress the brake pedal three times
Depress the brake pedal three times within 10 seconds
- Turn OFF the ignition and then start the engine to verify the indicator has been reset
Done!
These instructions are based on the Renault owner’s manual. This procedure should be work on the second generation of Renault Sandero (2012 2013 2014 2015 2016 2017 2018 2019 model years). Hopefully, the article of 2012-2020 Renault Sandero Oil Change Light Service Minder Reset useful for you. Good Luck!