2011-2018 Toyota Verso Oil Maintenance/Service Light Reset Guide

Time needed: 3 minutes

This section will quickly take you through the quick steps of resetting the oil maintenance light on your Toyota Verso. So let’s go inside and reset the maintenance required light.

1. Turn on the ignition to accessory position first

   If your vehicle has an ignition button, press the START/STOP button two times without stepping on the brake pedal

2. Get to the TRIP A

   Then with the TRIP button, you need to cycle a round into the says TRIP A
   

3. Turn off the ignition

   Now once you get this TRIP A and you need to turn off the ignition 

4. Hold down the TRIP button and then turn on the ignition

   After that, you’re gonna press in and hold the TRIP button beside the clock and then turn it back on 

5. Continue to hold down the button

   Keep holding it and you can see that it’s just in a countdown and once you get the four zeros flashing it that’s this was reset

6. Start the car

   Now you can start the car and the message should go away