2010-2020 Citroen C-Zero Spanner Light Service Due Minder Reset

2010-2020 Citroen C-Zero Spanner Light Service Due Minder Reset – The Citroën C-Zero is an electric car from the economy class. The car was designed with the help of Mitsubishi Motors in order, in addition to the Peugeot iOn, yet to get a European version of the Mitsubishi i-MiEV.

In the 90s, Citroën tried to design its first electric car. The car had the same design as the Citroën Saxo, but because it was powered by batteries, this design was considered environmentally friendly.

2010-2020 Citroen C-Zero Spanner Light Service Due Minder Reset

2010-2020 Citroen C-Zero Spanner Light Service Due Minder Reset

Time needed: 7 minutes.

When the next routine service is due, the Service minder or Spanner light will appear on the display. The service indicator must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Service Minder light on your Citroën C-Zero:

  1. Make sure the vehicle is completely stopped

    Turn OFF the ignition

  2. Press the INFO button repeatedly until appears on the display

    The button is located on the control panel
    spanner light service minder reset

  3. Press and hold the INFO button until blinks

    Release the button when the starts flashing

  4. Press the INFO button again until “CLEAR” is displayed on the display.

    After this, the time until the next periodic inspection will be displayed.
    Mitsubishi service light reset

  5. Start the engine to verify the indicator has been reset.

    Done!

For more details, please watch the following video:

These instructions are based on the Citroën owner’s manual. This procedure should apply to the first generation of the Citroen C-Zero (2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article of 2010-2020 Citroen C-Zero Spanner Light Service Due Minder Reset useful for you. Good Luck!

Name
Comment