2010-2020 Mitsubishi ASX Maintenance Required Service Light Reset

2010-2020 Mitsubishi ASX Maintenance Required Service Light Reset – The Mitsubishi ASX is a compact crossover produced by Japanese automaker Mitsubishi Motors since 2010. The ASX name is nothing more than an abbreviation for Active Smart Crossover. The final car was unveiled at the Geneva Motor Show in March 2010, about three years after the exposure of the concept. Compared to the latter, the changed details were several because the prototype presented too expensive solutions to be produced in large series and then the house has preferred to maintain many components in common with the Lancer and the Outlander.

For example, the front bumper and the headlights are inspired by the family feeling of the Colt, the rear hand is completely new, the interiors follow a full-bodied design, high-quality materials, and precise assembly according to Japanese tradition. The ASX names have been adopted for the European market alone while for Japan the car is sold as the Mitsubishi RVR. 

2010-2020 Mitsubishi ASX Maintenance Required Service Light Reset

2010-2020 Mitsubishi ASX Maintenance Required Service Light Reset

Time needed: 7 minutes.

When Routine Maintenance Required minder appears on the display. this informs you that a periodic inspection is due. The maintenance minder information display must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Maintenance Minder light on your Mitsubishi ASX:

  1. Make sure the vehicle is completely stopped

    Turn OFF the ignition

  2. Press the INFO button repeatedly until appears on the display

    The button is located on the control panel
    Mitsubishi maintenance required reset info button

  3. Press and hold the INFO button until blinks

    Release the button when the starts flashing

  4. Press the INFO button again until “CLEAR” is displayed on the display.

    After this, the time until the next periodic inspection will be displayed.
    Mitsubishi service light reset

  5. Start the engine to verify the indicator has been reset.

    Done!

For more details, please watch the following video:

These instructions are based on the Mitsubishi owner’s manual. This procedure should be work on the third generation of Mitsubishi ASX (2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article of 2010-2020 Mitsubishi ASX Maintenance Required Service Light Reset useful for you. Good Luck!

Name
Comment