2010-2014 Suzuki Kizashi Oil Change Light Service Minder Reset
|Last Updated on April 20, 2020 by Nick
2010-2014 Suzuki Kizashi Oil Change Light Service Minder Reset – The Suzuki Kizashi is a sedan from Suzuki in the D-segment. The Kizashi replaced the Suzuki Verona in the United States, a model derived from the Daewoo and Chevrolet Evanda.
The Kizashi was introduced in production form at the end of June 2009. Following the start of production at the end of 2009, sales will start in various European countries at the beginning of 2010. The Kizashi is available in various European countries including the Netherlands but is not sold in Belgium due to the lack of diesel engines.
2010-2014 Suzuki Kizashi Oil Change Light Service Minder Reset
Time needed: 7 minutes
When engine oil needs to replace, Oil Change Required or Change Oil message will appear on the display. The engine oil life system must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Oil Change Required Light on your Suzuki Kizashi:
- Turn the ignition key to the “ON” position without starting the engine
If your vehicle has an ignition button, press the Engine Start/Stop button twice without touching the brake pedal
- Press the TRIP knob for about 3-4 seconds, to enter the SETTING mode
The button is located on the cluster
- Scroll down and select OIL CHANGE
Rotate the knob to scroll
- Highlight the RESET OC and then press and hold the TRIP knob until “Successful” appears on the display
This indicates you have successfully reset
- Turn the ignition off and then start the engine to verify the indicator has been reset.
Done!
These instructions are based on the Suzuki owner’s manual. This procedure should apply to the first generation of the Suzuki Kizashi (2010 2011 2012 2013 2014 model years). Hopefully, the article of 2010-2014 Suzuki Kizashi Oil Change Light Service Minder Reset useful for you. Good Luck!