2008-2017 Peugeot Bipper Service Light Spanner Indicator Warning Reset

2008-2017 Peugeot Bipper Service Light Spanner Indicator Warning Reset – The Peugeot Bipper is a high-roof combination, which came in 2008 as a car (Bipper Tepee) and van (Bipper) on the market. It is built by the vehicle manufacturer Tofaş in Bursa (Turkey) where the identical Citroën Nemo and Fiat Fiorino are manufactured. In 2009, the Bipper was voted Van of the Year along with its sister models.

At launch, the Bipper was powered by either a 1.4-liter gasoline engine with 54 kW (73 hp) or a 1.4-liter HDi diesel four-cylinder engine with 50 kW (68 hp). The latter has a maximum torque of 160 Nm at 1750 pm. The combined fuel consumption is 4.5 liters of diesel fuel per 100 km with CO2 emissions of 119 g / km. With the diesel engine, instead of the standard five-speed manual transmission, the automated 5-speed manual transmission 2-Tronic is also available.

2008-2017 Peugeot Bipper Service Light Spanner Indicator Warning Reset

2008-2017 Peugeot Bipper Service Light Spanner Indicator Warning Reset

Time needed: 7 minutes.

When the next service is due, the Service minder or Spanner light will appear on the display. The service indicator must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Service Minder light on your Peugeot Bipper:

  1. Turn the ignition to the OFF position

    Make sure your vehicle is stopped completely

  2. There are 2 buttons on the dash, push and hold the Right one ( button)

    The button is located on the instrument cluster
    Peugeot Service Reset older model

  3. Turn ON the ignition but don’t start the engine; the distance recorder display begins a countdown

    Countdown from 10 will appears on the display

  4. Continue to hold down the button until “0” MILES appears on the display and the maintenance light turns off

    Release the button when the display indicates “=0”

  5. Turn the ignition off and then start the engine to verify the indicator has been reset

    Done!

For more details, please watch the following video:

This tutorial we got from the Peugeot owner’s manual. This procedure should apply to the first generation of the Peugeot Bipper (2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 model years). Hopefully, the article of 2008-2017 Peugeot Bipper Service Light Spanner Indicator Warning Reset useful for you. Good Luck!