2008-2015 Toyota Land Cruiser J200 T-belt Light Reset

2008-2015 Toyota Land Cruiser J200 T-belt Light Reset – This is the Toyota Land Cruiser is the best SUV car made by Toyota and has tough terrain on-road or off-road. This car is also known as the Toyota Roraima (Venezuela), Toyota Land Cruiser V8 (Europe), and the Lexus LX570. This car is an SUV that is resilient and able to roam the toughest terrain smoothly. Actually, SUV Toyota has been in development since 1951 and was first produced in 1954 ago. Until now the flagship SUV Toyota has entered the third generation the 200 series, and the fourth generation of the 150 series.

Now the car is already up on the last generation Toyota Land Cruiser 2015 models launched in 2014 ago. You should know that the development of the Toyota Land Cruiser passed through a period that is long with many variants that have been issued by Toyota to market. Until now Toyota has reached the third generation of the Land Cruiser 200 series. Now, Toyota re-introduces this car on the latest generation Toyota Land Cruiser 2015 model year will be coming soon in the near future.

2008-2015 Toyota Land Cruiser J200 T-belt Light Reset

2008-2015 Toyota Land Cruiser J200 T-belt Light Reset

Time needed: 7 minutes.

When the timing belt needs to replace, the T-Belt Light will appear on the display. The T-Belt data must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the T-Belt Light on your Toyota Land Cruiser J200:

  1. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal

  2. Press the ODOMETER/TRIP button repeatedly until you see “ODO”

    The button is located on the instrument cluster
    toyota oil maint reqd reset button

  3. Next, turn the ignition “OFF”

    Press the ENGINE START/STOP button once

  4. Press and hold the ODOMETER/TRIP button, and turn the ignition key to the “ON” position

    If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal

  5. Continue to hold down the ODOMETER/TRIP button for 5 seconds

    .

  6. Release the ODOMETER/TRIP button, then press the switch again till the display show a number

    Press the ODOMETER/TRIP button and 15 will appears on the display

  7. Now press again the ODOMETER/TRIP button until on the display shows the ODO miles

    Hold down the button for about 5 seconds

  8. Turn the ignition off and start the engine to verify the indicator has been reset

    Done!

For more details, please watch the following video:

This tutorial we got from the Toyota owner’s manual. This procedure should apply to the Toyota Landcruiser 200 series (2008 2009 2010 2011 2013 2014 2015 2016 2017 2018 model years). Hopefully, the article of 2008-2015 Toyota Land Cruiser J200 T-belt Light Reset useful for you. Good Luck!

One Comment