2012-2018 Opel/Vauxhall Insignia Oil Life Light Reset Guide

Welcome to the club, boss! In this post, I will show you how to reset your oil life warning light on the Opel/Vauxhall Insignia after you’ve done a service. Now I’m going to show you where to go for that.

So, this warning here has nothing to do with the service warning. If you’re getting that, you’ll need to plug in the vehicle to check other items the service warning itself. So let’s get right up in this.

Here’s How You Reset Oil Life Light On Opel/Vauxhall Insignia

It’s worth noting that the method you use will be determined by the year and type of your car (2012, 2013, 2014, 2015, 2016, 2017, 2018).

With Base Level Display

• Now we’ll start from the beginning here with switching the ignition on
• Then if you look on the left-hand stalk there’s a MENU button and you’ll press that until you get Reset up and see the oil life percentage

• When that comes up, you need to push and hold the BRAKE pedal in and the SET/CLR button at the end of the stalk you push in that and hold until you hear the audible sound which sends it back to 100

With Middle Level Display

With Up Level Display

• Get in the car and turn it on
• Now we’ll press the ◄ left arrow to get the cluster menu

• Then you’ll want to go to the very top one which is INFO. So we’ll scroll back up to that and press ✓
• Once you get to that screen you scroll down through it until you find the OIL LIFE. That would be 0% remaining or something low when you need your service redone
• After that, you press the right arrow button so that brings up the RESET option
• Next, you press the ✓ centre button and that would reset it back to a hundred percent

So that’s how you do it. Just follow these steps to turn off or reset the light there. I hope this article was helpful to some folks. Once you’ve changed the oil, you should be able to remove the warning from the dashboard. Thank you for your time, and best of luck!