Like most vehicles, the Dodge RAM has a minder light on the cluster to let us know it’s time to change the engine oil after you’ve done your oil change. So today, I’m going to show you how to reset the oil change or maintenance light on the Dodge Ram 1500/2500.
A pretty timely reminder on these Rams you want to change the oil every 6,000 miles with a 5w-20 weight, and you want to go ahead and put a full synthetic in there. Well, at least I recommend that. So let’s get to work.
Table of Contents
Time needed: 3 minutes
Here I want to share with all of you how to reset the oil change light on my 2010 Dodge Ram 1500. I thought this may be helpful to some of you other dodge owners. So let me show you what you need to do.
If your vehicle has an ignition button, press the ENGINE START STOP button twice without touching the brake pedal
Then we’re gonna go ahead and press the gas pedal down three times within 10 seconds, not fast but medium speed
Turn the ignition off and start the engine to verify the indicator has been reset
This procedure work on the third generation of Dodge Ram 1500/2500 (2006, 2007, 2008, 2009, 2010 model years).
To keep your truck in top running condition, you should change the engine oil regularly. Fortunately, there are several different ways you can do that. You can use regular oil or change the oil yourself. It depends on what type of oil you use and how often you drive. Check the oil level often after filling it up. Too much or too little oil can cause your engine to break down. For best results, keep your engine oil at the right level.
Your Dodge RAM 1500 should be serviced at least once every 10,000 miles or 12 months. To determine how often you should do this, consult your owner’s manual. This manual should have information on oil type and recommended intervals. The recommended oil change intervals are listed below. If you notice these signs, it’s time to change the oil. Oil changes also ensure that your engine stays clean and smooth, extending its life.
When choosing engine oil for your Dodge Ram 1500, you should check the manufacturer’s recommended oil. MOPAR is a brand of oil that is designed explicitly for Ram 1500s. Fiat Chrysler recommends this oil, which is available in 5W-20 and 5W-30 viscosity grades. Both meet API requirements. Other recommended oils include Pennzoil Platinum Full Synthetic oil and Shell Helix Ultra Full Synthetic oil. Although synthetic oils are more expensive than regular oils, they can prolong the life of your engine and make it run smoothly.
The 3.7l engine has a capacity of 5 quarts, while the 4.7l can hold 6 quarts.
Changing the oil in your Ram can set you back $40 to $50 in labor costs and $90 in replacement materials.
ATF+4 transmission fluid is used in the 2009 Dodge Ram 1500. A four-speed automatic or a five-speed automatic will be available for this specific model year and trim level of the car.
So that’s it; as you can see in the cluster, the oil indicator has been reset, so at about six thousand miles or so, it’s going to pop back on to remind me to change my engine oil. That’s how you reset it, so thanks a lot for reading, and have a good day.
Hey what's up Bimmers! Owning a BMW M8 comes with the responsibility of proper maintenance,…
Greetings, fellow Bimmer lovers! Today, we have an exciting topic to delve into: how to…
What's up Bimmer! Welcome to our guide on resetting the oil service light on your…
Wassup Bimmers? When it comes to maintaining your BMW M4 F82/F83/G82/G83, resetting the oil service…
Hey, what's up Bimmers! Welcome to the comprehensive guide on performing an easy oil service…
Hi, Bimmers! In the fast-paced world of automotive technology, staying on top of routine maintenance…
This website uses cookies.
View Comments
Talk about a click-bait piece of crap website.
My windshield washer fluid warning light won't go off after re-filling the washer fluid and the front fog light warning light won't go off and the front fog lights are working as they should.
Well detailed.
Thanks
My washer fluid light is on and won't go off. I checked the washer fluid and it's full. How do I get this light to go off?
If u used rain-x it won't go off