2002-2013 Volvo S60 Oil Maintenance Service Light Reset Guide

Last Updated on September 24, 2021 by Nick

What’s a cracking, hot thing? One of the problems your average do-it-yourselfer at home, when they’re doing their oil change and regular maintenance on their vehicle, is the maintenance light reset on the Volvo S60 or the service reminder indicator more appropriately.

The service reminder indicator periodically comes on at mileage intervals to remind you to perform basic service on your car. So first, let’s cover the various procedures for resetting the service reminder indicator in the different Volvo S60.

2002-2013 Volvo S60 Oil Maintenance Service Light Reset Guide

2002-2013 Volvo S60 Oil Maintenance Service Light Reset Guide

For your info, this operation work for the first and second generations of the Volvo S60 (2002, 003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 model years).

2002-2009 Volvo S60

On the 2002-2009 Volvo S60 models, the reminder appears in the information display at the lower left of the instrument cluster. So the way you reset is:

  • Put the key in the ignition and turn it to the position 1
  • Then make sure it’s on T1 by pressing the TRIP button
maintenance service light reset via old dash
  • Next, turn off the ignition
  • Now what I’m going to do is hold the TRIP button down turn the key to position 2
  • Keep hold the button and you will see the i light start to blink
  • As soon as it starts blinking you can let go shut the key off and you’re done

2010-2013 Volvo S60

Time needed: 3 minutes

Alright, so we’ll try to take a quick guide on this 2013 Volvo S60 just like yours. It doesn’t have the service light on currently, but I still should show you the result. So what you’re going to want to do is:

  1. Turn the ignition key to the position I

    First, hit the START button one time. So that puts it in what they call position one kind of turn some of the lights on

  2. Make sure it’s on T1

    Now you’re going to want to switch the trip computer with the T1/T2 button to where it says T1

  3. Hold down the T1/T2 button as you press the START button

    Now while it’s on T1, you need to long-press the T1/T2 button and with my thumb, I’m pressing and holding in the START button
    volvo oil service light reset with old dash

  4. Keep holding both buttons

    Keep them both held in till you see the little i light flashing

  5. Let it go

    Once it starts to flash you can let it go and you’re good to give me a holler

Please try T2 if T1 doesn’t work!

So that’s how you reset it. For a list of the factory scheduled maintenance on your vehicle, refer to your owner’s manual. So thanks for visiting with us today. If you have any questions or suggestions, you can leave a comment below.

Add a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.