2009-2014 Toyota Urban Cruiser Maintenance Light Reset

Last Updated on April 27, 2020 by Nick

2009-2014 Toyota Urban Cruiser Maintenance Light Reset – The Toyota Urban Cruiser is a supermini car developed by the Japanese manufacturer Toyota and sold under the Toyota and Scion brands. His two generations use the same platform as the Toyota Yaris respective. In both cases, the model five-door body and transverse front-engine. Its height is halfway between a hatchback and a compact SUV or minivan, in the same way that Mazda Verisa, the Juke Nissan and Suzuki SX4.

The first generation of Ist went on sale in 2002; also it sold in the United States between 2003 and 2006 as the Scion xA. The two available engines were gasoline and four cylinders in line: 1,3 liters of 87 hp and a 1.5 liter 109 hp. The gearboxes are available four-speed automatic and five-speed manual, both associated with a front-wheel-drive system. The second generation was launched in 2007, in the United States under the name Scion xD. It will start selling in Europe in early 2009 as the Toyota Urban Cruiser, where it was advertised as an all-terrain vehicle to face the Daihatsu Terios. The two gasoline engines of its predecessor one 1.8-liter petrol and 132 hp are added. There are variants of front-wheel drive and four-wheel drive, and the previous offer of gearboxes a continuously variable transmission added.

2009-2014 Toyota Urban Cruiser Maintenance Light Reset

2009-2014 Toyota Urban Cruiser Maintenance Light Reset

Time needed: 7 minutes

When engine oil needs to replace, the MAINT REQD message will appear on the display. The engine oil maintenance data must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the Oil Maintenance Required Light on your Toyota Urban Cruiser:

  1. Turn the ignition key to the “ON” position without starting the engine

    If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal

  2. Press the MODE button repeatedly until you see “TRIP A”

    The button is located on the instrument cluster
    oil maint reqd reset button

  3. Next, turn the ignition “OFF”

    Press the ENGINE START/STOP button once

  4. Press and hold the MODE button, and turn the ignition key to the “ON” position

    If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal

  5. Continue to hold down the MODE button until “000000” MILES appears on the display and the maintenance light turns off.

    Done!

These instructions are based on the Toyota owner’s manual. This procedure should apply to the second generation of the Toyota Urban Cruiser (2009 2010 2011 2012 2013 2014 model years). Hopefully, the article of 2009-2014 Toyota Urban Cruiser Maintenance Light Reset useful for you. Good Luck!